Service manuals on CD

[TektroG]

As there is no Hayn*s book of lies for my RF900 I'm thinking of getting one of these original manuals on CD off fleabay. Anyone got any experience, good or bad?

[John Hopkins]

As there is no Hayn*s book of lies for my RF900 I'm thinking of getting one of these original manuals on CD off fleabay. Anyone got any experience, good or bad?

I made my own cd for my GT750..I cut the back off my original Kawasaki service manual so that I could scan each page, then I saved each page as Jpeg, I had some space left on the cd so I did the same thing with the owners manual and the Haynes...then I stuck the originals back together with copydex....worked a treat, now I can just print out the pages I'm working on, and throw them away when I finish the job... :D John

[ozzybiker]

there is one on here

http://www.motorosok.hu/szervizkonyvek/index_eng.htm

or it's free on

http://www.repairmanualclub.com/

you just have to regester, i did.nt even get any spam and i'v downloaded about 6 manuels from there so far.

[trikerdrew]

That link from ozzybiker worked a treat-cheers chap.

Re the rf900 manual-workshop would be the way forward.Might cost you £50 but if your'e keeping it it'll save you a ton.

Might be worth a plead on old skool suzuki
http://oldskoolsuzuki.info/

or join these and ask cuz they are dead helpful

http://www.socweb.co.uk/

nice bikes thr rf9 very underratted.

cheers

Drew

[TektroG]

I made my own cd for my GT750..I cut the back off my original Kawasaki service manual so that I could scan each page, then I saved each page as Jpeg, I had some space left on the cd so I did the same thing with the owners manual and the Haynes...then I stuck the originals back together with copydex....worked a treat, now I can just print out the pages I'm working on, and throw them away when I finish the job... John

That would be OK if I had the service manual to start with, but I have only the owners manual. Cheers for the links guys.

[TektroG]

http://www.repairmanualclub.com/
Highly recommend this site, got my 360 page odd workshop manual incl. wiring diagrams, photos & exploded diagrams for nowt. Burned onto CD, now just need to print it off at work some w/e.....