v8_trike
03-07-2008, 07:20 PM
Gsxr 750 fighter project on a 'B' reg, ill never get round to finishing :( needs frame polishing (90% done) and a few odd jobs doing.
Complete gsxr 1000 K1 front end, mirror polished forks, (frame machined to accept bigger tob bearing) ABM top yoke and risers, new headstock bearings and seals, tank has a couple of small dents that need filling and a petrol tap.
Metmachex braced arm, new spindle, all rear wheel spacers machined, 750 shock fitted, just needs brake torque arm making, genuine Ducati 996 seat unit (excellent condition) modified 996 subframe, rose jointed to allow some height adjustment.
Wheels and cush drive were powdercoated at Triple S, and are unmarked (candy Purple) needs new wheel bearings before fitting.
Engine is a 30,000 mile 1127, (needs carbs, although i have a set from a 750 that will go with the box of bits) engine has been dry stored and bores oiled, started to paint strip the engine, needs finishing, and re coating.
No tyres or exhaust, I have the old wiring harness, and other bits, 95% of the bike is there just needs someone with time to finish off, ill throw in a complete nitrous kit (wizards of nos) with electric fuel pump, I think it has 35bhp jets fitted, but not sure :confused:
Im looking for a swap, pm me with what you have, otherwise its e-bay at the weekend!
Andy.
http://i297.photobucket.com/albums/mm215/v8_trike/100_3564.jpg
http://i297.photobucket.com/albums/mm215/v8_trike/100_3567.jpg
http://i297.photobucket.com/albums/mm215/v8_trike/100_3569.jpg
http://i297.photobucket.com/albums/mm215/v8_trike/100_3571.jpg
Complete gsxr 1000 K1 front end, mirror polished forks, (frame machined to accept bigger tob bearing) ABM top yoke and risers, new headstock bearings and seals, tank has a couple of small dents that need filling and a petrol tap.
Metmachex braced arm, new spindle, all rear wheel spacers machined, 750 shock fitted, just needs brake torque arm making, genuine Ducati 996 seat unit (excellent condition) modified 996 subframe, rose jointed to allow some height adjustment.
Wheels and cush drive were powdercoated at Triple S, and are unmarked (candy Purple) needs new wheel bearings before fitting.
Engine is a 30,000 mile 1127, (needs carbs, although i have a set from a 750 that will go with the box of bits) engine has been dry stored and bores oiled, started to paint strip the engine, needs finishing, and re coating.
No tyres or exhaust, I have the old wiring harness, and other bits, 95% of the bike is there just needs someone with time to finish off, ill throw in a complete nitrous kit (wizards of nos) with electric fuel pump, I think it has 35bhp jets fitted, but not sure :confused:
Im looking for a swap, pm me with what you have, otherwise its e-bay at the weekend!
Andy.
http://i297.photobucket.com/albums/mm215/v8_trike/100_3564.jpg
http://i297.photobucket.com/albums/mm215/v8_trike/100_3567.jpg
http://i297.photobucket.com/albums/mm215/v8_trike/100_3569.jpg
http://i297.photobucket.com/albums/mm215/v8_trike/100_3571.jpg